INVT Ups 10 Kva Black HT3110S

INPUT YES, default frequency=50Hz or settable
Cold Start 50%~125%(380VAC/400VAC/415VAC)
Acceptable Input Voltage 100% load@80%~125%
90% load@70%~80%
80% load@60%~70%
65% load@50%~60%
Single phase in,single phase out
Phase line-neutral
Transfer Voltage Range 110VAC/115VAC/120VAC
-Line low transfer 116VAC/122VAC/127VAC
-Line low recovery 275VAC/288VAC/300VAC
-Line high transfer 268VAC/279VAC/291VAC
-Line high recovery ≥0.95
Input Power Factor 40Hz – 70Hz
Input Frequency Range Support Any Generator
Generator
OUTPUT Settable
Frequency adaptable
Power 10
-Power(kVA) max 9
-Power(kW) max
Output Voltage Pure sine wave
-Waveform 220/230/240VAC
-Nominal voltage ± 1 %
-Voltage regulation ≤5% (50% – 100% -50%)
-Transient response ≤15ms(0% – 100% -0%)
-Transient recovery ≤1% THD, linear load
-Voltage distortion ≤5% THD, non-linear load
Output Frequency settable,±3Hz default
-Synchronization range 0.5~5Hz/s,2Hz/s default
-Slew rate (50±0.05) Hz
-Battery mode
Transfer Time 0
-Line mode to battery mode 0
-Inverter to bypass
Efficiency 92.0%
-Line mode with battery full charged 98.0%
-ECO mode 91.0%
-Battery mode <48dB@<70%load,70%load;1m away
Noise 110%: Transfer to bypass after 10 mins
Overload Capability (Line Mode) 130%: Transfer to bypass after 1 min
150%: Transfer to bypass after 30s, shutdown after 1 min.(Line mode)
110%: Shutdown after 10mins (Battery mode)
Overload Capability (Battery Mode) 125%:Shutdown after 10s(Battery mode)
>125%: Shutdown after 1s (Battery mode)
3:1
Crest Ratio
BATTERY
Rating/Type Depend on the capacity of external batteries
Quantity 16
DC Voltage 192/240VDC
Back-up Time Depend on the capacity of external batteries
Battery-Low Voltage (176±3)VDC
Charger
-Charging voltage (220±1%)VDC
-Charging current (max) 1A
-Charging time Depend on the capacity of external batteries
Leakage current <1mA
INDICATOR & ALARM
Display LED+LCD
Alarm Sounding once per second
Fault Continuous beeping