> Home Finishing & Construction>Pumps>Grundfos Submersible Pump 230 Volt UNILIFT AP50B.50.11.A1.V

New products

Free Delivery Grundfos Submersible Pump 230 Volt UNILIFT AP50B.50.11.A1.V View larger

Grundfos Submersible Pump 230 Volt UNILIFT AP50B.50.11.A1.V

UNILIFT-AP50B.50.11.A1.V

Vertical single-stage stainless steel submersible pump with integrated submersible 1-phase motor.
The pump is fitted with ring stand and carrying handle and is supplied with a 5 m mains cable and a level switch for automatic start and stop.
The impeller is a V impeller for 50 mm free passage suitable for pumping surface water, groundwater, wastewater and similar.
The pump has a double shaft seal and an intermediate oil chamber pre-filled with non-toxic special oil.
The motor is insulation class F with thermal overload protection and has long-life deep-groove greased-for-life ball bearings.
The pump has R 2″ discharge port and is ready for installation either free-standing or on an auto-coupling system.

More details

Add to Buy Later list



Description

LIQUID:
Maximum liquid temperature: 40 °C
Density: 998.2 kg/m³
TECHNICAL:
Type of impeller: V
Maximum particle size: 50 mm
MATERIALS:
Pump housing: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
INSTALLATION:
Pump outlet: R 2″
Maximum installation depth: 2 m
Auto-coupling: Y
ELECTRICAL DATA:
Motor type 1-phase: PSC
Power input – P1: 1.75 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 8 A
Cos phi – power factor: 0.95
Rated speed: 2760 rpm
Capacitor size – run: 20 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 5 m
Type of cable plug: SCHUKO
OTHERS:
Net weight: 11 kg
Gross weight: 12.5 kgDescription
LIQUID:
Maximum liquid temperature: 40 °C
Density: 998.2 kg/m³
TECHNICAL:
Type of impeller: V
Maximum particle size: 50 mm
MATERIALS:
Pump housing: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
Impeller: Stainless steel
DIN W.-Nr. 1.4301
AISI 304
INSTALLATION:
Pump outlet: R 2″
Maximum installation depth: 2 m
Auto-coupling: Y
ELECTRICAL DATA:
Motor type 1-phase: PSC
Power input – P1: 1.75 kW
Mains frequency: 50 Hz
Rated voltage: 1 x 230 V
Rated current: 8 A
Cos phi – power factor: 0.95
Rated speed: 2760 rpm
Capacitor size – run: 20 µF/400 V
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): F
Length of cable: 5 m
Type of cable plug: SCHUKO
OTHERS:
Net weight: 11 kg
Gross weight: 12.5 kg
ModelUNILIFT-AP50B.50.11.A1.V
  • Reviews (0)

    • Questions (0)

    No customer questions for the moment.

    Your Question has been successfully sent. Thank you.
    Ask a question
    hide form
    Name:
    Email:
    Question:
      Ask a question