APC Smart UPS On Line Hard Wire 3 Wire outlets Network Card W/O Rail Kit SRTG6KXLI

Max Configurable Power (Watts) : 5.0kWatts / 5.0kVA
Output Voltage Note : Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion : Less than 2 %
Output Frequency (sync to mains) : 50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages : 220 V, 240 V
Load Crest Factor : 3 : 1
Topology : Double conversion online
Waveform type : Sine wave
Bypass : Internal bypass (automatic and manual)
Input frequency : 40 – 70 Hz Auto-sensing
APC Smart UPS RT 230V Input voltage range for main operations : 160 – 285V
Other Input Voltages : 220 V, 240 V
Battery type : Lead-acid battery
Included Battery Modules : 2
Typical recharge time : 4hour(s)
Nominal Battery Voltage : +/- 96 V
Expected Battery Life (years) : 3 – 5
Battery Charge Power (Watts) : 239 Watts
Extendable Run Time : 1
Battery Volt-Amp-Hour Capacity : 960
Interface Port(s) : RJ-45 Serial, Smart-Slot, USB
Control panel : LED Status display with on line : on battery, Multifunction LCD status and control console
SRTG5KXLI Audible Alarm : Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
Emergency Power Off (EPO) : Yes
Surge energy rating : 600Joules
APC Smart UPS RT Maximum Height : 178MM, 17.78CM
Maximum Width : 440MM, 44.0CM
Maximum Depth : 620MM, 62.0CM
Net Weight : 51.9KG
Shipping weight : 59.0KG
Shipping Height : 275MM, 27.5CM
Shipping Width : 590MM, 59.0CM
Shipping Depth : 790MM, 79.0CM
APC Smart UPS RT Operating Temperature : 0 – 40 °C
Operating Relative Humidity : 0 – 95 (Non-condensing) %
Operating Elevation : 0 – 2011.68meters
Storage Temperature : -15 – 45 °C
Storage Relative Humidity : 0 – 95 (Non-condensing) %
Storage Elevation : 0 – 15240meters
Audible noise at 1 meter from surface of unit : 55.0dBA
Online thermal dissipation : 1109.0BTU/hr
Protection Class : IP20
Approvals : CE, EN/IEC 62040-1
Standard warranty : 3 years repair or replace (excluding battery) and 2 years for battery