HEISS Central Electric Heaters 160 L HEWH-160

The heater must be installed first and connected to its plumbing connections before connecting the electricity.
A stopcock must be installed on the cold line, a stopcock on the hot line, and a non-return valve on the cold line.
The heater must be filled with water before turning it on, and make sure that the water is running in the hot line before turning on or connecting the heater
electrocuted.
The heater must be connected with a wire of 6 mm or more, depending on the distances, and a Pacino switch must be installed next to the heater
And a main switch in the main electrical panel, with the installation of Earth Leakage for safety.
In the event that the heater is placed outdoors, a circuit must be made to protect the heater from weather factors such as rain and sunlight.
The heater must be set to a medium temperature (60°C) or lower to maintain the life of the heater.
Cold water pressure does not exceed 5 bar.
The anode shaft must be changed annually to maintain the life span of the heater